CN166 DC Low Power Distribution Board

CN166 DC Low Power Distribution Board 14 No 2 way Screw Terminal Connection

The CN166 basic unit has 14 No Positive and Negative Terminals (Especially for those who don’t like to solder). The input power can be connected either by wires, a 2.1mm DC plug or a 2.5mm DC plug, the input terminal will handle up to 15 Amps, the board can be used for DC voltages up to 24vDC & DCC. (The board can be used with higher voltages, however the resister should be removed to disable the LED)

The LED will show Green if the Polarity is correct,

Red if the Polarity is reversed by mistake.

There are 6 Fixing holes available

Length: 106mm

Width; 40mm

Height: 12mm   

Our power supplies plug directly into the 2.1mm socket.

Instructions